How to Get Video on Your Tactacam Reveal X Trail Camera
If you’re struggling to get video footage on your Tactacam Reveal X trail camera, you’re not alone. Knowing the right setup and steps can make a big difference in capturing clear, high-quality clips.
Once properly configured, your camera will smoothly record 720p or 1080p videos, depending on your preference. Keep reading to learn how to set up your camera for optimal video recording.
The Batteries, SD Card, and Antenna Required for Reveal X Video
To power your Tactacam Reveal X and store your footage, you need to install the correct batteries, SD card, and antenna. For batteries, eject the 12xAA cartridge tray and install 12 alkaline or lithium batteries; lithium batteries are recommended for cold weather because they perform better in low temperatures. Alternatively, you can use a rechargeable lithium cartridge that charges through the included cable or a solar panel, providing a longer-lasting power solution. This high-capacity rechargeable battery is 6000mAh, 43.2Wh and seamlessly fits the original battery slot. Like a cantilever scope mount, the rechargeable cartridge offers a stable and secure fit within the camera’s designated compartment. For extended field use with a solar panel, you can integrate a thermal drone to monitor battery temperature from above. A similar AGM thermal camera can be connected to your phone for remote viewing and diagnostics.
For storage, insert a compatible SD card from brands like SanDisk, Lexar, or Tactacam. Choose a card with at least 32GB capacity and a Class 10 or UHS-I speed rating to ensure smooth video recording.
The cellular antenna is essential for network communication. Make sure it is properly connected during setup to maintain a reliable connection. Pairing a 12V external battery or solar panel with the lithium cartridge can extend your power supply, with the cartridge serving as a backup. Ensuring these components are correctly installed will keep your Reveal X ready for capturing footage.
Wide Compatibility: Perfectly Compatible with Tactacam Reveal X, Ultra, XB, SK, Reveal X Pro, X Pro 2.0, X Pro 3.0, Reveal X Gen 2.0, Reveal X Gen 3.0 Series Cellular Trail Hunting Cameras.
ใWide Compatibilityใ Designed specifically for Reveal Cellular Trail Cameras, including models X, X-Pro, X Gen 2.0/3.0, Pro 3.0, SK, XB, and Ultra. A perfect drop-in replacement for the original battery, ensuring a seamless fit and reliable power for your outdoor adventures.
Fully Compatible Reveal Battery Pack: This Artman high-performance Reveal battery pack is fully compatible with Tactacam Reveal series cellular trail cameras, including Reveal Pro 3.0, X, X Ultra 3.0, X Gen 3.0, X Pro, X Gen 2.0, XB, SK models
Choose 720p, 1080p, and Video Length in App Settings
After setting up your batteries, SD card, and antenna, youโll configure video quality and length directly in the REVEAL App. Tap your camera, open Camera Settings, and set Camera Mode to Pic + Video. Choose Video Sizeโ720p is ideal if you want to conserve storage space, as it produces smaller files. If you prefer sharper footage, select 1080p, which provides higher resolution but consumes more storage capacity. Then pick Video Lengthโfrom 5 to 30 seconds, with some models supporting up to 59 seconds. Shorter clips use less space on your SD card, while longer clips can capture more of a behavior or event. A typical setting of around 15 seconds balances video detail with storage efficiency. Tap Apply Settings to save your choices. Remember, only photos are sent to the app; videos are stored on the SD card for you to review later. Higher resolution and longer durations will fill your SD card faster, so tailor these settings to how often you check your camera. The internal SIM card built into this model enhances remote access to your settings for faster adjustments in the field. Understanding the differences between night vision goggles can help you choose the best device for low-light observation. Night vision cameras rely on infrared illuminators to capture clear video in total darkness, a key detail that affects how your trail camera performs at night. For comparable low-light performance, some users opt for thermal imaging devices that detect heat signatures instead.
30MP Photos & 1080P HD Videos for Clear Wildlife Monitoring:Capture detailed outdoor moments with 30MP high-resolution photos and Full HD 1080P videos. The advanced image sensor delivers clear and vivid images during daytime and reliable performance in low-light environments. This mini trail camera helps capture wildlife activity, deer movement, and outdoor scenes with improved detail, making it ideal for deer scouting, wildlife observation,Garden Monitoring and property monitoring.
30MP Photos & 1080P HD Videos for Clear Wildlife Monitoring:Capture detailed outdoor moments with 30MP high-resolution photos and Full HD 1080P videos. The advanced image sensor delivers clear and vivid images during daytime and reliable performance in low-light environments. This mini trail camera helps capture wildlife activity, deer movement, and outdoor scenes with improved details, making it ideal for deer scouting,wildlife observation,and property monitoring.
VALUE WITHOUT COMPROMISE โ The FLEX-M2 cellular trail camera proves you donโt have to pay top dollar to get top performance. Itโs easy to use, customizable, reliable and comes with features that punch well above its price tag.
Activate Your Reveal X in the App for Video Features
To request videos through the Reveal X in the app, you must first fully activate your device and link it to your account. Open the Tactacam REVEAL app, tap the camera icon, then tap the plus (+) sign. Select Reveal X from the list, then scan the QR code inside the camera door to complete the setup. During activation, you will be prompted to name your camera and assign its location. Make sure your camera placement matches the cellular plan you select; choose Verizon or AT&T as indicated. To enable video requests, add a monthly or yearly data plan through the appโs Cameras section. Itโs also important to check for firmware updatesโyour Reveal X needs the latest firmware to support high-definition video requests. Understanding the difference between night vision and thermal imaging can help you choose the right camera for your specific monitoring needs. After completing registration, the app will verify that your camera has a cellular connection and appears in your account list. Skipping any of these steps can prevent the video features from functioning properly. Your camera must be fully activated and visible in your account before you can request videos. For troubleshooting connectivity issues, verify that your power source meets the cameraโs minimum voltage requirements during setup. As with adding a camera to the Moultrie Mobile app, you may also need to name your camera and assign its location during the activation process.
REAL-TIME PHOTOS DELIVERED STRAIGHT TO YOUR PHONE โ The REVEAL X 2.0 sends images to the free REVEAL app via AT&T 4G LTE the instant motion is detected. No WiFi. No SD card runs. Stop making blind trips and start making informed decisions
AUTO-CONNECT MULTI-CARRIER LTE โ AT&T AND VERIZON โ An integrated SIM automatically locks onto whichever carrier has the stronger signal at your exact location. No SIM swapping. No carrier lock-in. No dead zones from a single-network camera. Just signal
AUTO-CONNECT MULTI-CARRIER LTE โ AT&T AND VERIZON โ An integrated SIM automatically locks onto whichever carrier has the stronger signal at your exact location. No SIM swapping. No carrier lock-in. No dead zones from a single-network camera. Just signal
Connect via Wi-Fi to See a Live Preview Before Recording
Once connected to Wi-Fi, the live preview opens automatically. Use this feature to fine-tune your camera placement. Align the horizontal red line at waist level on your target trail to enhance wildlife captures. The preview helps you verify framing and camera angle before shooting, minimizing setup errors. You can make adjustments while still connected, ensuring precise positioning. Once satisfied, switch the camera back to normal operation to start recording. Ensure the blue button appears on the camera to confirm readiness for connection. The Spypoint Flex M also uses a similar live view feature to verify its aim before activation. Understanding military thermal optics can provide insight into how advanced heat-detection technology improves target acquisition in low-light conditions. If you need to eliminate the infrared glow for covert setups, you can disable the built-in IR emitters through the cameraโs settings menu, much like turning off night vision on other devices.
New version trail cam: Clear Day & Night Imaging Capture sharp 64MP photos (adjustable: 5/16/36/48/56/64MP) and smooth 4K HD videos (3840x2160P /2560x1440P). The high-quality optical lens ensures crisp daytime images and night vision performance, making it ideal for wildlife observation, deer scouting, and property surveillance.
๐๐๐๐: ๐ข๐ญ ๐ข๐ฌ ๐๐๐ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ฅ๐ ๐ฐ๐ข๐ญ๐ก ๐ก๐จ๐ฆ๐ ๐๐ข๐ ๐ข, ๐๐จ๐๐ฌ ๐๐๐ ๐ฌ๐ฎ๐ฉ๐ฉ๐จ๐ซ๐ญ ๐๐๐ฅ๐ฅ๐ฎ๐ฅ๐๐ซ/๐๐/๐๐ ๐ง๐๐ญ๐ฐ๐จ๐ซ๐ค๐ฌ, and ๐๐จ๐๐ฌ ๐๐๐ capable of real-time motion alerts or push notifications. The camera creates its own short-range Wi-Fi hotspot (๐๐จ๐ง-๐๐๐ฅ๐ฅ๐ฎ๐ฅ๐๐ซ) for setup, and downloading files only. Wi-Fi range is up to 33โ50 ft in open areas. The camera records automatically even when your phone is not connected. No subscription or monthly fees
ใNo WiFi Needed, Access Live Feed Videos via PhoneใNo WiFi connection required to view live footage. Equipped with a built-in 4G LTE SIM card and live streaming capability, this cellular trail camera delivers HD video straight to your smartphone from any location. Remotely observe site activity (farms, jobsites, ranches) and check feeding stations (deer ranches, other off-grid areas) without visiting the location in person, preserving the site condition and cutting travel time and fuel costs.
Verify Cell Signal So Your Reveal X Video Sends Remotely
To verify cell signal for your Reveal X camera, start by checking Tactacamโs coverage map to ensure your location is within a good AT&T or Verizon signal area. Poor coverage will result in a โNo Signalโ message, so you may need to move the camera to a better spot with stronger reception.
Next, confirm that the network setting on your camera matches your SIM cardโs carrierโeither AT&T or Verizon. Open the Reveal app and check the network selection, then ensure itโs set to the same carrier as your SIM. A mismatch prevents the camera from transmitting videos remotely.
Finally, inspect the SIM card for dirt or damage. Reinsert it firmly, and verify that the IMEI and ICCID numbers match whatโs on your account. In the app, confirm the SIM is active. Run a test send; a steady green LED indicates good signal and successful connection, while a red LED points to weak signal or an issue with sending. Connecting to the cameraโs Wi-Fi network allows for aiming and camera management without requiring internet access.
Immerse Yourself in Seamless Signals: The TALKSIM data SIM card delivers high-speed 4G LTE network service. It combines the resources of three major U.S. cellular carriers, AT&T, Verizon and T-Mobile. Designed with smart technology, this USA SIM card automatically selects the optimal carrier for your needs. Enjoy a solid signal and ensure you to access the extensive nationwide data network, no matter where you are in the United States.
AT&T & Verizon DualโNetwork USA Nationwide Coverage: Prepaid data SIM card works with AT&T and Verizon mainstream US cellular networks, delivers stable 4G LTE/5G signal across most United States regions including remote wild areas. Even rural woods, farmland and offโgrid locations for hunting trail cameras can get steady cellular connection for realโtime device access.
4G USA Coverage (Automatic Switching AT&T, T-Mobile and Verizon): TALKSIM data SIM card sources its signal from the U.S. to ensure stability and security. It automatically compares signals from Verizon, T-Mobile and AT&T, selecting the best local signal for improved network reliability, delivering steady 4G LTE connection all year round.
